Public Jobs

Renovation of the interior building envelope separating the LOBBY area from the entire RECEPTION and OFFICE and ELEV. LOBBY area to provide a uniform UL 752 Rated Level 3 Bullet Resistance and NIJ 0108.01 Level IIIA of Ballistic Resistance, AND upgrading this same interior building envelope to comply with current CBC and CFC Fire & Life Safety Codes and ADA/ADAAG Accessibility Standards and Guidelines.

The restoration of approximately 1,265 sf of interior space, plus associated Restroom and Support spaces, as well as the complete replacement of the roof and ceiling system and storage on the west side of the building. Additionally, facade repairs, window and glazing replacement, new appliances, casework, finishes, new HVAC system (w/ single-source BiPolar Ionization units incorporated as Bid Alternate No. 1) and electrical distribution scope - including Wi-Fi/Internet access (as Bid Alternate No. 2) - are incorporated into the project.

Furnishing all labor, tools, equipment, materials, except as herein specified; and doing all work associated with pavement seal coats, hot mix asphalt inlays, full depth reclamation (FDR), crack seal, drainage improvements, and pavement delineation.

Furnishing all labor, tools, equipment, materials, except as herein specified; and doing all work associated with converting the lawn surrounding Alameda City Hall at 2263 Santa Clara, Alameda, CA 94501 to a drought tolerant landscape, as detailed in the Project Plans.

(See contract documents.)

Furnishing all labor, tools, equipment, materials, except as herein specified; doing all work associated with maintenance or improvements to existing signs, sign posts, and striping; and providing proper pedestrian and traffic control, including placement of temporary no parking signs when necessary.

Furnishing all labor, tools, equipment, materials, except as herein specified; and doing all work associated with repairing the Bayview Weir structure. This shall include removing unsound concrete and repairing spalled surface concrete area, repairing cracks in concrete by epoxy injection, removing chain-link fence between water level and walkway and construct new vinyl-coated fencing, repairing spalled concrete in walkway, retrofit 11 columns by installing glass fiber reinforced polymer; including mobilization, demobilization, Water Pollution Control Plan (WPCP), traffic controls, debris and pollutant containment, permits, clean-up and all other associated work to complete the project at the locations designated in the plans.

The Project includes, but is not limited to, performing the following Work: Furnishing all labor, tools, equipment, materials, except as herein specified; and doing all work associated with removing and installing utility (storm drain, sanitary sewer, water, electrical, natural gas, telecom, etc.) systems, utility services, street lighting, curb, gutter, sidewalk, driveway, street paving, landscape and irrigation, SWPPP, Site Management Plan compliance, traffic controls, and any associated work necessary for Project completion at the plant-designated locations.

Scope of work is to improve, upgrade and renovate five interior areas within the Maintenance Service Center. These Interior Improvements are focused on functional and aesthetical modernizations, Building Code compliancy upgrades, ADA accessibility renovations, and work which includes (but is not limited to) new interior finishes, casework, appliances, toilet fixtures, accessories, doors and door hardware.

The Project includes, but is not limited to, performing the following Work: Furnishing all labor, tools, equipment, materials, except as herein specified; and doing all work associated with the Harbor Bay Isle Lagoon stormwater control system including all demolition work including handling and legal disposal of lead containing materials, structural concrete repair and new concrete work, coating of concrete surfaces, new chain link fencing, new galvanized grating, installation of a new owner-furnished gate actuator, new level control instruments, installation of owner-furnished electrical enclosures and controls, all electrical improvements, testing, site restoration, temporary controls, and all other work as shown on the Plans and as called for in the Special Provisions and as directed by the Engineer.